CP-65T-SL3

CP-65T-SL3

Low Volume Sprayer Turbo Nozzle with Triple Stream Tip

AG

Quick Nozzle Info

Low volume sprayer turbo nozzle with triple stream tip pre-installed for liquid fertilizer applications. GPM range of 0.13 to 0.96 at 30–60 psi. Designed for 20″ spacing. 1/4-turn quick disconnect. All parts replaceable.
Ground Sprayer Series

The CP-65T-SL3 is the CP-65T-SL low volume sprayer turbo nozzle with the triple stream accessory tip pre-installed at the factory. The triple stream tip is ideal for liquid fertilizer applications, producing 3 fully defined clean streams with equal capacity and velocity. The 3-stream pattern reduces leaf burn and drift compared to flat fan tips, and is specifically designed for 20″ boom spacing. At 14 mph and 40 psi the tip yields rates as low as 3.2 GPA to as high as 23.3 GPA depending on which orifice is selected. The 1/4-turn quick disconnect glass-filled nylon body adapts to new and existing sprayers without tools.

The CP-65T-SL3 has a GPM range of 0.13 to 0.96 at 30–60 psi with the triple stream tip installed, slightly higher than the standard deflector tip range due to the wider pressure range supported by the triple stream tip. The tip features durable, impact-resistant, UV-resistant, and highly wear-resistant construction with good chemical resistance. Operating speed range is 10–20 mph at 20″ boom spacing.

The triple stream tip is interchangeable — customers who already own the CP-65T-SL can add the triple stream tip separately using part number CPS275T-3SS1. All sprayer parts are replaceable for long service life. Use the CP Quick Calc to find suggested orifice settings for your target GPA.

Body Material:

Glass-Filled Nylon

Connection Type:

1/4-turn quick disconnect

Selector Type:

Poly 6 orifice selector with flat fan flow rates

Orifice Sizes:

1.5, 2, 3, 4, 5, 6

Deflector Type:

Triple Stream Tip (pre-installed)

Deflector Angles:

Triple Stream

Operating Pressure Range:

30-60 psi

GPM Range:

0.13 to 0.96 GPM (with triple stream tip)

Mounting Range:

Recommended for 20" centers or less. Orientation should be between 0° and 45° upward of ground parallel.

Technical documentation, flow charts, and setup guides specific to CP-65T-SL3. Download spec sheets, calibration data, and application references to get the most accurate performance from your equipment.

Ready to Order?

CP Nozzles’ products are sold and supported through a worldwide network of authorized dealers. Find yours here.

Not sure which Nozzle is right for your application? Our team can help.

Find the right adapters, check valves, and fittings for this nozzle. Each accessory is engineered to work seamlessly with CP’s design. Ensuring proper flow, consistent performance, and reliable operation in the field.

Explore alternative nozzle options with comparable flow rates, droplet spectrums, or construction. Whether you’re matching a specific application requirement or comparing configurations, these nozzles offer similar performance characteristics to help you dial in the right setup.